Here is a project for a function generator with the popular IC XR2206
The function generator can generate Square, TTL, Sine and Triangle waveforms from 1Hz to ~1Mhz with Voltage regulation to Square Sine and Triangle waveforms.
Circuit and components here
IC1___________LM7812 12V DC voltage regulator
IC2___________XR2206 Function Genertor
IC3___________LM7805 5V DC voltage regulator
IC4___________SN74LS00 Nand gate IC TTL
Q1___________ BC327 50V 800mA PNP Transistor
Q2, Q3, Q4_____ BC337 50V 800mA NPN Transistor
D1-D4_________ DB101 Diode bridge
D5____________ 1N4148 75V 150mA Diodes
R1, R2, R12______4.7K 1/4W Resistor
R3, R4, R7, R9___ 27K 1/4W Resistor
R5, R6, R16______1K 1/4W Resistor
R8, R13_________2.2K 1/4W Resistor
R10____________3.3K 1/4W Resistor
R11____________ 100K 1/4W Resistor
R14____________ 47ohm 1/4W Resistor
R15____________10K 1/4W Resistor
C1, C8__________ 1000uF 25V Electrolytic Capacitors
C2_____________ 22uF 16V Electrolytic Capacitors
C3, C7__________ 100uF 25V Electrolytic Capacitors
C4_____________ 2.2uF 25V Electrolytic Capacitors
C5_____________0.001uF 50V Polyester Capacitor
C6_____________ 10uF 25V Electrolytic Capacitors
C9_____________ 0.1uF 50V Polyester Capacitor
C10____________ 470uF 16V Electrolytic Capacitors
VR1, VR5 (Preset)__ 25K Potentiometer
VR2 Volume______ 10K Potentiometer
VR3 Volume______ 100K Potentiometer
VR4 (Preset)______ 1K Potentiometer
You can download the pcb in word format
Because i need this for a specific purpose, i first made it at the breadboard, so that to be sure that its suitable, after that i did it on a pcb
Frequency Range, which can be selected third range are.
1. 1-100 Hz
2. 100-10,000 Hz
3. 10,000-1,000,000 Hz
i place it in a wooden box but dressed by papers of aluminium
I made pcb with the known method of laser printer
Here is the 5-pole switch ,but i use only three poles, aw i said before it’s for changing the scales
1. 1-100 Hz
2. 100-10,000 Hz
3. 10,000-1,000,000 Hz
Next step is the panel. I could use a computer to do it ,but my computer doesn’t work then,so i made the measures by hand (toooo much waste of time!)
Start placing the stuff. You can see two filters there,one from a computer supply and the other …(i don’t remember)
and voila…
I made some improvements because i don’t like the result of the wave forms ,i replace the transformer and i insulate the 5-pole switch
Waveforms 100Hz-1KHz-10Khz-100Khz-880Khz
Square 1k 10k
Square 10KHz 98KHz
Square 3KHz 750KHz